HomeMy WebLinkAboutA028 - Resolution No. 02-624 adopted December 17, 2002 RESOLUTION NO. 02-624
RESOLUTION APPROVING PRELIMINARY PLAT OF
DAYTON INDUSTRIAL PARK SUBDIVISION
FOR THE CITY OF AMES, IOWA
WHEREAS, the developer is requesting approval of a Preliminary Plat for Dayton Industrial Park
Subdivision, including approximately 15.55 acres of which 0.69 acre is part of the existing public right-of-
way for South Dayton Avenue;
WHEREAS, the developer is proposing to subdivide the subject property into 13 lots for industrial
land use, ranging in size from 0.68 acre to 1.81 acres; and,
WHEREAS, three outlots (Outlots A, B, and C) will be established for the street right-of-way of
Armstrong Street, Glidden Avenue, and Southeast 5"` Street; and,
WHEREAS,the developer intends to develop the property for general industrial land use with access
provided to the Subdivision from South Dayton Avenue and from Southeast 5"' Street.
WHEREAS, the Ames Planning and Zoning Commission reviewed this Preliminary Plat at their
meeting of October 2, 2002, and recommended approval with the following stipulations.
1. A note must be included on the Final Plat that states that access to Lot 1 from South Dayton
Avenue is granted only on a temporary basis, until such time that Southeast 5'h Street, east
of South Dayton Avenue, is constructed to connect with South Dayton Avenue.
2. A note must be included on the Final Plat that states that access to Lots 2 and 3 is restricted
to Armstrong Street.
3. The developer is responsible for the cost of constructing all streets, sidewalks, bike paths,
and other public improvements, as required in the Economic Development Agreement
approved by Resolution No. 02-467 on August 27, 2002.
4. The developer is responsible for the cost of extending all water, sanitary sewer, and storm
sewer utilities in the right-of-way for Armstrong Street and Glidden Avenue as well as one-
half of the cost of constructing water main improvements in the right-of-way for Southeast
5 1h Street.
5. The developer is responsible for 100 percent of the cost of extending sanitary sewer in the
South Dayton Avenue right-of-way from a point on the south boundary of the Subdivision
north for a distance of 383.0 feet.
6. The cost of extending sanitary sewer in the right-of-way for South Dayton Avenue along the
north 280.9 feet of the Subdivision will be divided evenly(50150)between the developer and
the City of Ames.
7. Water connection fees along South Dayton Avenue must be paid prior to or as a part of the
submittal of the Final Plat documents.
8. No construction for street improvements associated with Armstrong Street,Glidden Avenue,
and Southeast 5"'Street shall commence prior to the required right-of-way being owned by
the Developers or the City of Ames.
9. The developer is required to install and dedicate all public improvements prior to approval
of the Final Plat or execute an Improvement Agreement to guarantee the completion of all
public improvements and provide security in the form of an Improvement Guarantee, as set
forth in Section 23.409 of the Municipal Code.
10. On-street parking will not be allowed on the streets in this Subdivision.
11. The developer shall be responsible for the construction of a ten-foot-wide bicycle path along
the east side of South Dayton Avenue.
12. A Development Agreement shall be signed prior to the submittal of the Final Plat
documenting the responsibilities of the developer and the City in the development of this
site.
NOW, THEREFORE, BE IT RESOLVED by the City Council of the City of Ames, Iowa, that the
Preliminary Plat of Dayton Industrial Park Subdivision is hereby approved with the above-listed stipulations.
ADOPTED THIS 17th day of December, 2002.
Diane R. Voss, City Clerk Ted Tedesco, Mayor
Introduced by:
Seconded by:
Voting aye: Cross, Goodhue, Hoffinan, Quirmbach, Vegge, Wirth
Voting nay: None Absent: None
Resolution declared adopted and signed by the Mayor this 17th day of December, 2002.