HomeMy WebLinkAbout~Master - Establishing New Electrical Utility Rate Classification ORDINANCE NO. 2827
AN ORDINANCE TO ESTABLISH A NEW ELECTRICAL
UTILITY RATE CLASSIFICATION FOR MANUFAC-
TURING/PROCESSING TYPE INDUSTRIAL CUSTOMERS
WITH EXTREMELY HIGH DEMAND FOR AND CONSUMP-
TION OF ELECTRICAL ENERGY; AND ESTABLISHING
EFFECTIVE DATES
BE IT ENACTED, by the City Council of the City of Ames, Iowa:
Section One. For the purpose of establishing a new electric utility rate
classification the Municipal Code of the City of Ames, Iowa, shall be and is
hereby amended by adding thereto a new section 28.5.1 as follows:
"Sec. 28.5.1 INDUSTRIAL RATE
(1) Availability: Provisions of Sec. 28.5 notwithstanding, elec-
trical energy and service shall be available at the following "indus-
trial rate" to manufacturing/processing type industrial customers
receiving monthly service of not less than 2,500 Kw billing demand
and 600,000 Kwh/month consumption. Service shall be at 13,800
volts or higher. The customer shall furnish all transformation for
utilization equipment. The rate provided for in this section shall
be in full force and effect on and after the first day of July,
1982, through and including the 30th day of September, 1982. On
and after the first day of October, 1982, customers who had been
on this section's rate shall either receive service at the Large
Power Rate provided for in section 28.5 of the Ames Municipal
Code, or such other rate as may then be in effect and applicable.
(2) Rate Per Month. A customer receiving service under the
rates of this section shall be charged, for each monthly billing
period, a demand charge of $2.77 per Kw for all kilowatts of
billing demand; and, an energy charge of 3. 162¢ per Kwh for the
first 100,000 Kwh, 2.885¢ per Kwh for the next 400,000 Kwh, and
2.4695it per Kwh over 500,000 Kwh.
(3) Fuel Adjustment, Primary Service Credit. All charges as
aforesaid shall be subject to the current applicable fuel adjustment
charge as provided for in section 28.2 of the Municipal Code; and,
a five percent (5 0) credit for primary service.
(4) Billing Demand. 'Demand', for the purpose of billing, shall
be the greater of:
(a) The peak fifteen (15) minute demand measured during
the current monthly billing period, or
(b) Fifty percent (500) of the peak demand measured during
the preceding eleven (11) months,
(c) provided, however, that the 'demand' used for billing
shall in no case be less than 2,500 Kw.
(5) Minimum Bill. The minimum monthly bill shall be the highest
demand charge in the current or preceding eleven (11) months.
(6) Power Factor Adjustment. A power factor adjustment may be
made, at the option of the utility, when the power factor at the
time of maximum monthly demand is less than 85 0 lagging. If the
power factor is less than 85 0, the billing demand may be increased
as follows: (85o minus measured power factor) times 1.5 times
(current month measured demand).
(7) Credit for Customer-Owned Substation. The total billing for
demand charge and energy charge shall be reduced by five per
cent 0 0) as a credit for a customer-owned and maintained sub-
station.
(8) Excessive Facility Charge. In the event service facilities in
addition to, or different from, a standard installation are re-
quested by the customer, or are required to serve the customer's
load, the city shall furnish, install, and maintain such facilities
subject to the following considerations:
(a) The type, extent, and location of such service facilities
shall be determined by agreement between the city and the
customer.
(b) Such service facilities shall be the property of the City
of Ames Electric Utility.
(c) The customer shall pay a monthly rental charge on those
facilities in excess of the facilities included in a standard
installation.
(d) If the optional or nonstandard facilities are used for
other customers also, the rental payable by the customer shall
be that portion of the total rental which is reasonably assign-
able to the customer.
(9) Conditions. The industrial rate shall be subject to the follow-
ing specific conditions.
(a) The customer's total usage on a single premise shall
determine whether the customer qualifies for service under
this rate structure. In no event shall the customer be billed
on both large power and industrial rates. A premise is
defined as an industrial establishment and shall include out-
lying or adjacent buildings used by the same provided the
use of service in the outlying buildings is supplemental and
similar to the service used in the main buildings.
2
(b) Fluctuating loads. If use of energy is intermittent or
subject to violent fluctuation, the utility may add to the 15-
minute measured demand an amount equal to 65 0 of the rated
capacity in Kw of apparatus which causes such fluctuations.
(c) Customer shall furnish and maintain all equipment and
transformation for utilization from the connection point on the
Utilities 13,800 volt system.
Section Two. This ordinance shall be in full force and effect from and after
its passage and publication as required by law.
Passed this 15th day of June 1982
A*gd,44
��yC erk Gin B1Cn , r Pro Tem
3